You have to visit the official website to identify your product and then download the drivers and the software for your operating systems. I've browsed through the selections and it appears that the drivers and the software for the supported products have Windows 10 compatibility.
When installing your new scanner onto a Windows XP/2000 system that already has another USB Flatbed scanner or All-in-one Scan/Copier/Printer device installed, it may be necessary for you to disconnect the other Flatbed scanner from the USB port for the Film scanner to work properly, as stated on the Microsoft website.
Cyberview Cs Scanner Drivers For Mac
With the introduction of the DigitDia scanner, Reflecta has presented the very first scanner that can scan directly from the magazine. This allows to scan large image archives automatically and with high quality within a very short time. An ideal assistance for this task are the SilverFast image automatics, which ensure a smooth scanning process. In addition, there are further important features such as the patented SilverFast Multi-Exposure, which increases the Dynamic Range of the scanner from 2.8 (631 grayscales) to 3.75 (5,623 grayscales) [Measurement by LaserSoft Imaging].
We recommend the SilverFast Archive Suite for running the DigitDia 7000. Using the batch scan mode you can automatically save whole magazines to HDRiRAW data format, Multi-Exposure can optionally be activated. The data of the infrared channel for dust and scratch removal with iSRD can also be written to this RAW data files. ADF is an abbreviation for Automatic Document Feeder. The DigitDia 7000 film scanner is able to feed in small format slides automatically. This means, the user does not have to transport the filmholder from image to image by hand, but controls the feeder with SilverFast.
Considering the number of slides I had to scan, I opted for the third option. As far as I know, there is only one such model of scanner available on the market in this category at the time being: the Digitdia family, from Reflecta. These scanners can be purchased on many websites selling computer or photo equipments. At the time I purchased my scanner, mid-2011, the current version was Digitdia 5000. In late 2011, a new version, Digitdia 6000 is available. The main differences are an increased scanning resolution (from 3600 dpi to 5000 dpi), and the replacement of the ICE technology by an equivalent one named Magic Touch.
The Digitdia scanners seem to be the same as the PowerSlide scanners from Pacific Images, which are sold in the US (in general at a lower price). Be careful to the version numbers, which do not match 1-to-1, as the Digitdia 5000 corresponds to the PowerSlide 3650 and the Digitdia 6000 to the PowerSlide 5000. As far as I understood, all these scanners are manufactured in Taiwan by Pacific Images, and Reflecta is the European reseller.
The Digitdia scanner looks like a legacy slide projector, where the lens ensuring the image projection is replaced by a digitization device. It seems that Reflecta / Pacific Images re-used the hardware basis of some older slide projectors from Braun. The scanner is delivered with three slide magazines:
The scanner is quite noisy: there is some smooth noise when moving slides (comparable to a regular slide projector), and a much more strident noise while scanning the slide (much higher than the typical noise of a desktop scanner). It's even higher when ICE is on. As far as possible, it's better not to plan to stay in the same room as the scanner during the scanning process.
When using the universal magazine, you should know the following trick (which is not documented in the user manual): there is an orange cursor on the slide feed which has to be moved before, so that the slides are correctly pushed into the scanner (see a picture and a video here).
The Digitdia scanner is delivered with a software named CyberView X, for Microsoft Windows or Mac OS. It allows configuring the scans (resolution, color depth, ICE, etc.), and launching them (slide by slide, or by batches of up to 100 slides). I'd say this is not a very convenient software, in the sense that the user interface is not very well designed, and that it has some bugs. But, once you're familiar with it, it is ok to perform the basic tasks you need to do to control the scanner. Do not expect more, like managing or post-processing the scanned images, you should better use a dedicated commercial software for this purpose. CyberView X also has a Twain interface, but I do not really see the interest for such kind of scanner.
It is also possible to buy the scanner with an additional software called SilverFast, whose main interest seems to be in the post-processing of images. But it is quite expensive, and the advantage with regards to common image processing software is not very clear.
When scanning a slide, the scanner has to detect the position of the frame, to scan only the photo area, in particular to distinguish vertically oriented versus horizontally oriented slides. I guess this is done at software level, though I'm not 100 % sure.
There are two durations to consider: the manipulation time (i.e. the time you spend to prepare slides, and post-process the images), and the scanning time (i.e. the time the scanner spents to scan the slides, but without you).
The datasheet announces a scanning time of 90 seconds per slide at the maximum resolution. This might be true, but the real time spent per slide is higher, because some time is needed for preparing the scanner before scanning each slide, and to transfer and save the image. In practice, I observed:
With a resolution of up to 10.000 dpi and a colour depth of 4.2, the magazine scanner DigitDia 7000 delivers digital reproductions of your slides in high quality at a top speed.The scanner works fully independently, simply slide the magazine into the scanner and enter the amount of slides to be scanned. The scan software also offers automated functions to correct brightness, colour and contrast.The following magazines can be used with the DigitDia 7000:- CS-magazines- Universal-Magazines DIN 108- LKM Magazines- Paximat Magazines
One simple reason your computer may not detect the scanner is a loose connection. Check the USB and AC adapter cords and all connections to make sure they're tight and secure. Examine the cables themselves for signs of damage that may prevent them from working properly. Pets can chew on cords or the cables can rub against nearby furniture to wear through the protective outer coating and cause failure. If you're connected through a network, check the various cables and connections at the router.
Scanners can be complicated to install, and often require a careful ballet of multiple steps to do it correctly. If you skip steps or do them out of order, your computer will not see the scanner. Follow all directions exactly for proper installation. Double-check that the scanner works with your operating system, as your scanner may not be compatible with older or the newest versions. Check online at your scanner manufacturer's website for any updates or information for installation problems.
When it comes to computers, conventional wisdom says to reboot if things seem wonky. Sometimes rebooting helps reset settings that may have gone off, and correct program and operational issues. If your computer suddenly refuses to connect to your scanner -- a scanner you have used in the past without trouble -- restart and see if the problem persists.
If your drivers are outdated or corrupted, the computer may have problems detecting or communicating with that device. Check for the newest version of your scanners drivers, and make sure your operating system is updated to promote proper connections. If you've installed a piece of hardware or device before your scanner stopped working, that newcomer may be conflicting with your scanner. Update its driver too, or disconnect it if possible, and see if your scanner works again.
Run VueScanInsert image into scannerSet "InputMedia type"Press "Preview" buttonAdjust crop box with mousePress "Scan" buttonIf the colors don't look quite right inthe preview, try clicking with the right mousebutton (with control key on Mac OS) on an areaof the image that should be gray.To reset to the automatic color balance setting,double-click on the image with the right mousebutton (with control key on Mac OS).If the lighting in the scene is unusual (i.e.at sunset or with stage lighting), try setting"ColorColor balance" to "Neutral".Using Scanner as CopierRun VueScanSet "InputScan task" to "Copy to printer"Set "InputMedia type"Set "InputMedia size"Insert image into scannerPress "Scan" buttonRepeat from step 5Working with Scanned ImagesVueScan is designed to save scanned images to JPEG files(by default) or TIFF files (optionally).You can configure your favorite image editing program toautomatically open each image when a scan completes. Use the"PrefsExternal viewer" option to control this.On Mac OS X, you can set up the default viewer for .tif and .jpg files by: click once on a .tif or .jpg file choose "FileShow info" choose "Open with application" pick the application you want to use press the "Change All" buttonOn Windows, you can set up the program that automaticallystarts with scanned images by setting up a file associationfor .tif and .jpg files. To create a file association, clickon a .tif or .jpg file with the right mouse button,select "Open with", then "Choose program". Pick the programyou want to use, and also select "Always use theselected program to open this kind of file".On Linux, use the "PrefsViewer" option to select theapplication to use to view .tif and .jpg files.Note that VueScan's technique for saving scans to a fileuses half as much memory as when using a TWAIN interfaceor a Photoshop Import Filter. Since VueScan is designedto work with very large, high-resolution images, it doesn'tinclude a TWAIN interface or Photoshop Import Filter.(You need to turn on the "PrefsRelease memory" optionto release all image memory prior to sending the scanto the image viewer.)Note also that VueScan's technique for saving scans to a fileallows you to edit an image while simultaneously scanning thenext image. Since some scans can take between 5 and 10 minutes,this results in significantly higher productivity than whenusing a TWAIN interface or a Photoshop Import Filter.Scanning Roll of FilmIf you're scanning many frames from the same roll of film,the following procedure will optimally set the CCDexposure and film base color (i.e. mask color): Set "InputMore options" to "All" Set "InputMedia type" Insert film with most transparent area If "InputLock exposure" visible Clear "InputLock exposure" Press "Preview" button Adjust cropping if necessary If "InputLock exposure" visible Set "InputLock exposure" Press "Preview" button If "InputLock film base color" visible Set "InputLock film base color" Batch ScanningTo scan multiple images in a batch, set "InputBatch scan"to "All" to scan all frames in a device, or set it to "List"and type in the list of frames (i.e. "4 3 1" for frames 4,3 and 1, in that order).More InformationFor more information, refer to theVueScan User's Guide.General Scanning ResourcesYou can often find answers to common scanning questions bysearching the archives of the comp.periphs.scanners newsgroup withgroups.google.com.You can also discuss scanning techniques, problems andworkarounds with other experienced scanner users in this newsgroup.There's an excellent web site withscanning tipsmaintained by Wayne Fulton. It contains a scanning tips forflatbed scannersandfilm scanners.There's also a summary of theavailable film scanners, areview of VueScanand an example of using VueScan'scleaning, intensity, and contrast options.Changes from Previous VersionsWhat's new in version 8.1.26 Improved infrared cleaning on Canon, Epson and Acer scanners Added support for PIE PrimeFilm PF7250Pro Added support for realtime updating of "ColorPixel colors" Added support for saving to Readiris on Mac OS X Fixed problem with some older Microtek USB scanners Fixed problem with Reflecta DigitDia 4000 (PIE PS3650) Fixed problem with Epson GT-9000 / ES-1200CWhat's new in version 8.1.25 Improved infrared cleaning Fixed problem with Epson Perfection 4990 transparency scans Fixed problem with clicking with Alt key (displays last image) Fixed problem with "ColorView color"What's new in version 8.1.24 Significantly improved display update speed Added support for real-time display update Added support for real-time histogram update Added support for Agfa DuoScan f40 USB Added "ColorThreshold" option for text display Added "PrefsAnti alias text" option Added "PrefsAnti alias image" option Fixed problem with UMAX PowerLook 1000 transparency scansWhat's new in version 8.1.23 Significantly improved display update speed Faster display update when changing brightness and threshold Fixed problem with high-resolution scans on some Epson scanners Changed "ColorBrightness" option to also affect B/W images Added "PrefsEnable density display" optionWhat's new in version 8.1.22 Added anti-aliased display of images Added "B/W threshold" option for scanning text Fixed problem scanning text on some scanners Fixed problem with infrared cleaningWhat's new in version 8.1.21 Significantly increased speed of zooming in and out Fixed problem with Canon multi-function printer/scanners (MP-series) Fixed problem with some newer SCSI Epson scanners on wide SCSI adapters Fixed problem with initializing Epson Perfection 2480/2580 on Mac OS X and Linux Fixed problem with preview & scan sometimes not displaying in correct tabWhat's new in version 8.1.20 Added support for Epson Perfection 4990 / GT-X800 Added support for Epson PM-A900 Improved infrared cleaning on all scanners Fixed problem with 4800 dpi scans on Canon 9950F Fixed problem with infrared cleaning on Canon scanners Fixed problem using raw scan files from NikonScanWhat's new in version 8.1.19 Fixed problem with film scanning on Epson Perfection 2480 Improved quality of film scans on Epson Perfection 1670 Improved quality of film scans on Epson Perfection 2480 Improved quality of film scans on Epson Perfection 2580 Improved 1 bit scans on some scannersWhat's new in version 8.1.18 Fixed problem with film scanning on Epson Perfection 2480 Fixed problem with film scanning on Epson Perfection 2580 Fixed problem with 1 bit scans on some scanners Fixed problem with hanging when scan is all black or whiteWhat's new in version 8.1.17 Fixed problem with auto focus with PIE scanners Fixed problem with option panel width when system font is large Fixed problem with gray scans on several scanners Fixed problem with scans on some newer Microtek scanners Fixed problem with scanner profiling using some Kodak Q60 targets Fixed problem with profiling in guided mode Improved color correction with Epson Perfection 4870 / GT-X700 Changed "FileDefault options" to set all options to defaultWhat's new in version 8.1.16 Added support for Epson FS-1300 (same as FilmScan 200) Fixed problem with Epson Perfection 1640 Fixed problem with Minolta Scan Elite II, Scan Dual III, Scan Dual IV Fixed problem scanning text with some Umax scanners Fixed problem with display update when changing output color space Fixed problem with infrared cleaning with: Acer ScanWit 2740/2750 Canon FS-4000 Canon D2400U Canon 3200F Canon 5000F Canon 8000F Canon 9900F Canon 9950F Epson Perfection 4870/GT-X700 What's new in version 8.1.15 Significantly improved speed when scanning text Significantly improved display quality when scanning text Increased maximum scan width to 65536 pixels Added output file name to guided modeWhat's new in version 8.1.14 Significantly improved speed when updating display Significantly improved speed saving filesWhat's new in version 8.1.13 Improved color correction for Canon scanners Improved color correction for Epson scanners Improved infrared cleaning (better scratch removal) If in Japanese time zone, display domestic Epson scanner names If in USA time zones, default US Letter paper size, otherwise use A4 Added 12x17 in. paper size for tabloid-size scanners Save scanner make, model, and transparency mode in raw scan files Fixed problem with infrared scans on Canon 9950FWhat's new in version 8.1.12 Fixed problem with multi-scanning on Minolta Scan Dual IV Improved scan quality on Minolta Scan Elite 5400 Improved infrared cleaning on Minolta scanners Improved color on some UMAX scanners Added support for Epson ES-10000G Added support for Epson PM-A700What's new in version 8.1.11 Added support for Epson F-3200 Faster scanning on many Epson scanners Improved infrared cleaning on Epson 4870 Fixed problem with reflective scans on Epson 4870 Fixed problem with Microtek i900 Fixed problem with Microtek X6USB Fixed problem with too-slow scans after turning off guided modeWhat's new in version 8.1.10 Fixed problem with Canon 9950F Fixed problem with Canon 4200F Fixed problem with Canon D2400U Fixed problem with Canon D1230U Fixed problem with Canon FB620S Improved scans on Canon 5000F Improved scans on Canon 8000F Fixed problem with flatbed scanning in Advanced mode Fixed problem with firewire SmartDisk scanners on Mac OS X Fixed problem with Microtek X6USB scanner Increased delay for tool-tips from 1 to 3 seconds Reduced number of dollar-sign watermarks in trial version Added support for 9 Canon MultiPass multi-function scanners (Windows only) MP360 MP370 MP375 MP390 MP700 MP730 MP750 MP760 MP780 What's new in version 8.1.9 Fixed problem with descreening Fixed problem with 24-bit scans on some Canon scanners Fixed problem with strip film scans on Canon 9900FWhat's new in version 8.1.8 Added support for transparency adapter on some Canon scanners Fixed problem with Canon 5000F not working on Mac OS X Fixed problem with some PIE scanners on Mac OS X Fixed problem with some options displaying blanks instead of zero Fixed problem with UMAX PowerLook 1000What's new in version 8.1.7 Improved speed of flatbed scans (preview & scan done together) Improved speed of PhotoSmart scans (preview & scan done together) Added 'Quality' and 'Media size' options to guided modeWhat's new in version 8.1.6 Added support for Epson CX-4600 Fixed problem with Canon 5000F Fixed problem with Canon 9950F on Mac OS X Added support for new version of Plustek OpticFilm 7200 Automatically turns off CanoScan Toolbox on Mac OS XWhat's new in version 8.1.5 Added support for 16 Canon scanners CanoScan LiDE 35 CanoScan LiDE 50 CanoScan LiDE 80 CanoScan D640U CanoScan D1230U CanoScan D1250U CanoScan D2400U CanoScan 3000F CanoScan 3200F CanoScan 4200F CanoScan 5000F CanoScan 5200F CanoScan 8000F CanoScan 8400F CanoScan 9900F CanoScan 9950F Changed background color for images to a neutral gray Serial number on Mac OS X shared among all users on a system Fixed problem with window getting shorter each time on Mac OS X Overall speed improvementsWhat's new in version 8.1.4 Added support for Epson GT-15000 scanner Fixed problem with some HP OfficeJet/PSC scanners Fixed problem with Epson Perfection 4180 Fixed problem with film profiling Fixed problem with single tab panel optionWhat's new in version 8.1.3 Added support for Epson Perfection 4180 on Mac OS X Improved usability when in guided mode Create icon on Windows desktop when installing Use "My Pictures" for default folder on WindowsWhat's new in version 8.1.2 Improved quality when reading digital camera raw files Fixed problem with Epson RX600 scanner at 2400 dpi Changed color of "Guide me" button on Windows and LinuxWhat's new in version 8.1.1 Now remembers Guided/Advanced mode when re-run Added support for Epson CX-3600 Added support for Epson RX-420 Added support for Epson Perfection 4180 Fixed problem with Epson Perfection 2480/2580 on Mac OS X and LinuxWhat's new in version 8.1 Improved user interface for new users Added guided tasks (i.e. Wizards)Supported ScannersVueScan supports more than 400 different scanners, and these areorganized by vendor name below. Please note that not all scannerswork with all operating systems or SCSI/USB/Firewire interfaces, butmost combinations are known to work. The best way to find out forsure if VueScan works with your scanner, operating system andinterface is to download a trial version from www.hamrick.com. Acer/Benq Agfa Apple Canon Epson Hewlett-Packard (HP) Kodak LaCie Linotype-Hell MediaX Microtek Minolta/Konica Nikon Pacific Image Electronics (PIE) Plustek Polaroid Reflecta SmartDisk UMAX UnsupportedAcer/BenQ 300C 300F C310U 310S 310U 320S 320U 340U 610Plus 610C 610S 610ST 610U 620S 620ST 620U 620UT 640BU 6400UT 640BT 640S 640ST 640U 640UT 1220ST 1240UT 3300U 4300U 5000E 5000U 5250C 5300U 5450U 7400UT ScanWit 2720S ScanWit 2740S ScanWit 2750Agfa Arcus 1200 Arcus II Duoscan DuoScan f40 Duoscan HiD Duoscan T-1200 Duoscan T-2000 XL Duoscan T-2500 SnapScan 1236 StudioScan StudioScan II StudioScan IIsi StudioStar SnapScan 300 SnapScan 310 SnapScan 600 SnapScan 1212U SnapScan 1236S SnapScan 1236U SnapScan e10 SnapScan e20 SnapScan e25 SnapScan e26 SnapScan e40 SnapScan e42 SnapScan e50 SnapScan e52 SnapScan e60Apple Color OneScanner 600 Color OneScanner 1200/30CanonThe following Canon scanners are supported on Windows, Mac OS X and Linux,and don't need the Canon ScanGear software to be installed: CanoScan 300 CanoScan 600 FB1200S FB620 FB620U FB630U FB636U FB1210U N650U N656U D660U N670U N676U N1220U N1240U LiDE 20 LiDE 30 FS2700 FS2710 FS4000The following Canon scanners are supported on Windows and Mac OS X,but first need the Canon ScanGear software to be installed: LiDE 35 LiDE 50 LiDE 80 D1230U D2400U 3200F 5000F 5200F 8000F 8400F 9900F 9950FThe following Canon scanners are supported on Windows,but first need the Canon ScanGear software to be installed: D640U D1250U 3000F 4200F MP360 MP370 MP375 MP390 MP700 MP730 MP750 MP760 MP780Epson Epson 1000 ICS ES-1000C / GT-8500 ES-1200C / GT-9000 ES-6000HS ES-8500 Expression 636 / GT-9500 Expression 800 / GT-9600 Expression 836XL / GT-12000 / ES-8000 Expression 1600 / ES-2000 Expression 1640XL / ES-8500 Expression 1680 / ES-2200 Expression 10000XL / ES-10000G FilmScan 200 / FS-1300 F-3200 GT-2200 GT-4000 GT-5000 GT-5500 GT-6000 GT-6500 GT-8000 / ES-800C GT-8500 / ES-1000C GT-10000 / ES-6000 GT-10000+ / ES-6000H GT-15000 / ES-7000H GT-30000 / ES-9000H Perfection 600 Perfection 610 / GT-6600U Perfection 636S / GT-7000S Perfection 636U / GT-7000U Perfection 640U / GT-6700U Perfection 660 Perfection 1200S / GT-7600S Perfection 1200U / GT-7600U Perfection 1240U / GT-7700U Perfection 1250 / GT-7200U Perfection 1260 / GT-7300U Perfection 1270 / GT-7400U Perfection 1640SU / GT-8700F Perfection 1650 / GT-8200U Perfection 1660 / GT-8300U Perfection 1670 / GT-8400UF Perfection 2400 / GT-9300UF Perfection 2450 / GT-9700F Perfection 2480 / GT-F500 Perfection 2580 / GT-F550 Perfection 3170 / GT-9400UF Perfection 3200 / GT-9800F Perfection 4180 / GT-F600 Perfection 4870 / GT-X700 Perfection 4990 / GT-X800 Stylus CX1550 Stylus CX5100 / CC-600PX Stylus Photo RX600 / RX610 / PM-A850 Stylus CX5300 / CX5400 Stylus Photo RX500 / RX510 Stylus CX6300 / CX6400 / PX-A650 Stylus CX5200 / CC-600 Stylus CX3200 / CC-570 Stylus CX3600 / PX-A550 Stylus CX4600 Stylus CX6600 Stylus CC700 Stylus PM-A870 Stylus PM-A700 Stylus PM-A900 StylusScan 2000 StylusScan 2500Hewlett-Packard (HP) OfficeJet D-series OfficeJet G55 OfficeJet G55xi OfficeJet G85 OfficeJet G85xi OfficeJet G95 OfficeJet K60 OfficeJet K60xi OfficeJet K80 OfficeJet K80xi OfficeJet V40 OfficeJet V40xi OfficeJet V60 OfficeJet V60xi OfficeJet V30 OfficeJet V45 OfficeJet 720 OfficeJet 750 OfficeJet 750xi OfficeJet 780 OfficeJet 780xi OfficeJet 4100 OfficeJet 4105 OfficeJet 4200 OfficeJet 5100 OfficeJet 5500 OfficeJet 6100 OfficeJet 7100 ScanJet ScanJet Plus ScanJet IIc ScanJet IIp ScanJet IIcx ScanJet 3p ScanJet 4c ScanJet 4p ScanJet 5p ScanJet 2100C ScanJet 2200C ScanJet 4100C ScanJet 5100C ScanJet 5200C ScanJet 5300C ScanJet 6100C ScanJet 6200C ScanJet 6300C ScanJet 7400C ScanJet 8200C PhotoSmart PhotoSmart S20 (Windows only) PSC 920 PSC 950 PSC 1000 PSC 1100 PSC 1200 PSC 1300 PSC 1310 PSC 1350 PSC 2100 PSC 2150 PSC 2170 PSC 2200 PSC 2300 PSC 2400 PSC 2500KodakThe RFS-3600 is supported on Windows andMac OS X, and you first need to installCyberView Xbefore running VueScan. RFS-2035 RFS-2035 Plus RFS-3570 RFS-3600LaCie SilverScanner DTPLinoType-Hell Jade Jade II Linoscan 1400 Linoscan 1450 Office Office2 Saphir Saphir Ultra Saphir Ultra IIMediaXThese scanners are supported on Windows andMac OS X, and you first need to installCyberView Xbefore running VueScan. SilverScan 1800 SilverScan 1800AFL SilverScan 2700 Pro WorkScan 3600proMicrotek ArtixScan 1100 ArtixScan 120tf ArtixScan 1800f ArtixScan 2020 ArtixScan 2500/2500f ArtixScan 4000 t / 4000 tf ArtixScan 4500 t FilmScan 35 FilmScan 1800 FilmScan 2700 FilmScan 3600 ScanMaker 4 ScanMaker 5 ScanMaker 330 ScanMaker 630 ScanMaker 636 ScanMaker 2000 ScanMaker 5600 ScanMaker 5700 ScanMaker 6400 XL ScanMaker 6800 ScanMaker 8700 ScanMaker 9600 XL ScanMaker 9700XL ScanMaker 9800 XL ScanMaker E3 ScanMaker E6 ScanMaker i700 ScanMaker i900 ScanMaker III / Designer Pro ScanMaker V600 ScanMaker V6USL ScanMaker X6 ScanMaker X6USB ScanMaker X12USL SlimScan C6Minolta/Konica QuickScan 35 Konica Qscan Scan Dual Scan Dual II Scan Dual III Scan Dual IV Scan Elite Scan Elite II Scan Elite 5400 Scan Multi Scan Multi II Scan Multi Pro Scan SpeedNikon CoolScan (LS-10) CoolScan II (LS-20) CoolScan III (LS-30) CoolScan IV (LS-40) CoolScan V (LS-50) CoolScan 1000 (LS-1000) CoolScan 2000 (LS-2000) CoolScan 4000 (LS-4000) CoolScan 5000 (LS-5000) CoolScan 8000 (LS-8000) CoolScan 9000 (LS-9000) AX-110 AX-210 AX-1200Pacific Image Electronics (PIE)These scanners are supported on Windows andMac OS X, and you first need to installCyberView Xbefore running VueScan. PrimeFilm 1800 PrimeFilm 1800i PrimeFilm 1800U PrimeFilm 1800AFL PrimeFilm 1800LAB PrimeFilm 3600PRO PrimeFilm 2700 PrimeFilm 1800LC PrimeFilm 3650PRO PrimeFilm 3650U PrimeFilm 3650LAB PrimeFilm 7250PRO PowerSlide 3600 PowerSlide 3650PlustekThese scanners are supported only on Windows, andyou first need to install the Plustek software beforerunning VueScan. OpticFilm 7200 OpticPro ST24 OpticPro ST28 OpticPro ST48Polaroid SprintScan 35 SprintScan 35+ SprintScan 35/LE SprintScan 45 SprintScan 120 SprintScan 4000 SprintScan 4000+ReflectaThese scanners are supported on Windows andMac OS X, and you first need to installCyberView Xbefore running VueScan. CrystalScan 2700 DigitDia 3600 DigitDia 4000 iScan ProScan 3600 ProScan 4000 RPS 3600 SilverscanSmartDiskThese scanners are supported on Windows andMac OS X, and you first need to installCyberView Xbefore running VueScan. SmartScan 2700 SmartScan 3600UMAX Alpha Vista II Astra 180 Astra 1200S Astra 1220S Astra 2000 Astra 2100 Astra 2200 (SCSI only) Astra 2400S Astra 3400 (some versions) Astra 5400 Astra 600S Astra 610S Astra 6400 Astra 6450 Gemini D-16 Mirage I D-16L Mirage II Mirage II SE Powerlook I Powerlook II Powerlook III PowerLook 180 Powerlook 270 Powerlook 270+ Powerlook 270-2 Powerlook 1000 Powerlook 1100 Powerlook 1120 Powerlook 2000 Powerlook 2100 XL Powerlook 3000 PS 2400X Supervista S-12 Vista S-6 Vista S-6E Vista S-6EG Vista S-8 Vista S-12 Vista S-12G Vista T-630Unsupported All parallel-port models All drum scanners All UMAX USB models except 3400 (some versions), 5400 and PowerLook 180 All Microtek USB models except X6USB, X12USL, 4700, 5600, 5700, 6800, 8700, FilmScan HP ScanJet models 3300, 3400, 3500, 4200, 4300, 4400, 4500, 4600, 5400, 5500 Canon FS2720 Agfa SnapScan Touch All Lexmark, Artec, Mustek, Primax, Brother, Visioneer modelsPlease note that these scanners are unsupported for several reasons: Parallel port scanners are unsupported because the commands they use are undocumented by the vendors, are extremely complex and are difficult to reverse engineer. The other scanners aren't supported because the vendor won't document the commands they use, and these commands are too complex to reverse-engineer.Supported Digital Camera Raw FilesVueScan supports raw scan files for thedigital cameras in the following list. However, note thatthe colors may will be more accurate if you use an IT8 cameratarget (like the one produced by Wolf Faust) and if youuse VueScan's "ProfileProfile scanner" command to createan ICC file for your camera.Canon PowerShot 600Canon PowerShot A5Canon PowerShot A50Canon PowerShot Pro70Canon PowerShot Pro90 ISCanon PowerShot G1Canon PowerShot G2Canon PowerShot G3Canon PowerShot G5Canon PowerShot S30Canon PowerShot S40Canon PowerShot S45Canon PowerShot S50Canon PowerShot Pro1Canon EOS D30Canon EOS D60Canon EOS 10DCanon EOS 300DCanon EOS DIGITAL REBELCanon EOS Kiss DigitalCanon EOS D2000CCanon EOS-1DCanon EOS-1DSCanon EOS-1D Mark IICasio QV-2000UXCasio QV-3000EXCasio QV-3500EXCasio QV-4000Casio QV-5700Casio Exlim Pro 600Contax N DIGITALCreative PC-CAM 600Creo Leaf Valeo 22Fuji FinePix S2ProFuji FinePix S5000Fuji FinePix S7000Fuji FinePix F700Imacon IxpressKodak DC20Kodak DC25Kodak DC40Kodak DC50Kodak DC120Kodak DCS315CKodak DCS330CKodak DCS420Kodak DCS460Kodak DCS460AKodak DCS520CKodak DCS560CKodak DCS620CKodak DCS620XKodak DCS660CKodak DCS660MKodak DCS720XKodak DCS760CKodak DCS760MKodak EOSDCS1Kodak EOSDCS3BKodak NC2000FKodak ProBackKodak PB645CKodak PB645HKodak PB645MKodak DCS Pro 14nKodak DCS Pro 14nxKodak DCS Pro SLR/cKodak DCS Pro SLR/nLeica Digilux 2Minolta DiMAGE 5Minolta DiMAGE 7Minolta DiMAGE 7iMinolta DiMAGE A1Minolta DiMAGE A2Nikon D1Nikon D1HNikon D1XNikon D100Nikon D2HNikon D70Nikon E950*Nikon E990*Nikon E995*Nikon E2100*Nikon E2500*Nikon E4300*Nikon E4500*Nikon E5000Nikon E5700Nikon E8700Olympus C5050ZOlympus C5060WZOlympus C8080WZOlympus E-1Olympus E-10Olympus E-20Panasonic DMC-LC1Pentax *ist DPentax Optio SPentax Optio S4Phase One LightPhasePhase One H10Phase One H20Phase One H25Rollei d530flexSigma SD9Sigma SD10Sinar 12582980-byteSony DSC-F828*There is aprogram availablethat will enable raw files on these Nikon digital cameras.Mac OS X Release NotesYou can share one copy of VueScan among multiple Mac OS X usersby putting the VueScan folder into a read-only folder somewhereon the hard drive. This will cause the default folder for eachuser to be that user's "Pictures" folder.If VueScan doesn't see your scanner on Mac OS X, first makesure that Apple System Profiler can see the scanner. If itdoesn't, try powering off the computer, powering off the scanner,powering on the scanner and then powering on the computer.If you're using an Epson 2400/2450 on Mac OS X and are havingproblems with long startup times, try using the Firewire cable.Make sure you haven't set "Show input menu in menu bar" inthe "International/Input Menu" preferences.If VueScan hangs with Firewire scanners, make sure OpenFirmwarehas "security-mode" set to "none". Other settings cause problems.To use PIE (Pacific Image Electronics) scannerswith VueScan, you need to first installCyberView X(not CyberView 32) in the default location.VueScan uses the CyberView X libraries to control the scanner.To use the Epson Perfection 3170 with VueScan, you need tofirst install the Epson software for this scanner.If VueScan hangs when starting up, make sure that you don't havethe International Input Menu turned on - this causes problems withVueScan. This is in the International system preferences.Canon N-series and LIDE scanners are powered directly by the USB port.The USB port must provide a power supply of 500 mA. If you plugthe scanner into the USB port on a keyboard or other USB device,the scanner may not work properly. Attach the scanner directlyto a USB port on the computer or to a 500 mA self-powered USB hub.If you find that an N-series or LIDE scanner doesn't work with one ofyour USB ports, try plugging it into the other USB port.If you're using Mac OS X 10.0.4 or 10.1 with a SCSI scanner, you may need todownload newer Mac OS X SCSI driversDon't install this driver on Mac OS X 10.2 or later, since this can causekernel crashes.The driver for the beige G3 built-in SCSI has bugs on Mac OS X 10.1which have been fixed in 10.2. The driver for the beige G3 built-inSCSI is included with Mac OS X.If you don't have a SCSI interface on your Macintosh, many usershave reported success using VueScan with Firewire-to-SCSI adapters.If you've installed the beta UMAX OS X scanner software, you'll needto remove the extensions it installed in order to use VueScan.These are stored in /System/Library/Extensions. To temporarilyremove them, just rename the .kext file to .kext.save.If you're using a Microtech FireSCSI adapter, make sure thatyou're using SCSI ID 0 and that the SCSI termination is correct.If you're using an Orange Micro 906F SCSI card, make sure it'supgraded to at least firmware version F1.35.Windows Release NotesIf you've set up a shortcut to vuescan.exe and are havingproblems, try double-clicking c:\vuescan\vuescan.exe directly.This will test whether the problem is with the way the shortcutwas set up or whether the problem is with VueScan.To use PIE (Pacific Image Electronics) scannerswith VueScan, you need to first installCyberView X(not CyberView 32).VueScan uses the CyberView X libraries to control the scanner.To use the Epson Perfection 3170 with VueScan, you need tofirst install the Epson software for this scanner.If your scanner has a button on the front andif a program starts up when you press this buttonwhile running VueScan, you have a program runningin the background that you need to stop. To stopthis program, press control-alt-delete, choose thetask manager and use it to stop this program. Oneexample of this is the Epson Status Monitor.VueScan works on Windows 95/98/ME/NT/2K/XP, and works withall known SCSI cards. It also works fine withmultiple computers on a single SCSI bus (i.e. dualported access to scanners).If you're using Windows 2000 or Windows XP and a SCSI scanner andif VueScan doesn't find your SCSI scanner, you may need todownload and install ASPI(you don't need this for USB scanners):If VueScan won't start and you have Logitech MouseWareor a Logitech keyboard installed, try stoppingEM_EXEC.EXE and/or ITOUCH.EXE. There have been somereports of these two programs causing problems withVueScan. (These two Logitech programs cause problemsfor many other Windows programs as well.) Alternatively,try turning off the "Smart Move" option in MouseWare.If you have the Adaptec DirectCD Wizard on the Toolbar,you may have to remove it to get VueScan to run.If you have an ELSA Synergy III graphics card (or possiblyother NVideo graphics cards) and VueScan hangs whenstarting, you may need to disable the Desktop Managerthat comes with the card (the file that causes the problem isnvdesk32.dll).Linux Release NotesOn Linux, run vuescan from any directory.Your serial number will be stored in ".vuescanrc"in your home directory. If you run VueScan as root and enteryour serial number, it will be stored in "/etc/vuescanrc"and all users on the computer will share this serial number.If you're using a Firewire scanner, make sure you'veloaded the sbp2 module.If VueScan crashes on startup, make sure you aren't usingthe idescsi module - this can cause problems.Note that PIE (Pacific Image Electronics) scannersdo not work with VueScan on Linux becauseCyberView Xisn't available on Linux.VueScan uses the CyberView X libraries to control the scanner.If you're using the Epson Perfection 3170 (GT-9400), makesure you have /usr/lib/libesint32.so from theEpson Kowa SANE distribution.You also need to set up the environment variable SANEI_EPKOWA_FIRMWAREFILEto point to the firmware file esfw32.bin.You need to make sure all of the /dev/sg* devices areread/write accessible. To see what scanners are available,type "cat /proc/scsi/scsi".Note that the Adaptec AVA-1505 SCSI card doesn'twork with a Nikon film scanner, and will cause ahard bus hang if you use VueScan with it. Thisis due to a bug in the aha152x driver. Another bugin this driver causes junk to be appended to theend of a raw scan when using the PhotoSmart. OtherSCSI cards seem to work fine with VueScan on Linux.There have also been problems reported with theAdaptec AVA-2904E and the Canon FS2710, althoughthis combination works fine on Windows.If you want to add or remove scsi devices withoutrebooting your system, use the following commands:echo "scsi add-single-device 0 0 ? 0" > /proc/scsi/scsiecho "scsi remove-single-device 0 0 ? 0" > /proc/scsi/scsi(use the SCSI ID in place of "?" above)If you're using libusb to access a USB scanner, you needto make sure the protections in /proc/bus/usb are set upproperly. There's some information aboutsetting up libusb on Linux.To use the scanner.o module on Linux, you need to load thescanner driver and specify the vendor ID and product IDof the scanner. For instance, to recognize the Canon N670U, use"modprobe scanner vendor=0x04a9 product=0x220d". Then type"cat /proc/bus/usb/devices" and make sure "Driver=usbscanner"is enabled for your scanner.If you're using Linux 2.4.12 or later, you don't needto do anything special to have the scanner auto-recognized.If you're using an earler version of Linux with a USBscanner, set up the SCANNER0 environment variable to pointto /dev/usbscanner or /dev/usb/scanner (it needs to beread/write accessible), set up the SCANVID0 environmentvariable with the USB Vendor ID (VID) and set up theSCANPID0 environment variable with the USB Product ID (PID).You can support up to 8 USB scanners at a time by usingSCANNER1, SCANNER2, SCANVID1, SCANVID2, etc.For instance, to set up VueScan for the Epson 640, usethe following commands if you're using csh: setenv SCANNER0 /dev/usbscanner setenv SCANVID0 04b8 setenv SCANPID0 010cor if you're using sh or bash: export SCANNER0="/dev/usbscanner" export SCANVID0="04b8" export SCANPID0="010c"Note that you don't need to set up these environment variableson newer Linux kernels or if you're using libusb.If you're having problems with USB timeouts (i.e. withthe Nikon CoolScan IV (LS-40), make sure you use the"usb-uhci" (CONFIG_USB_UHCI) module instead of thealternate "uhci" (CONFIG_UHCI_ALT) module. You might alsoincrease the kernel usb timeout value (CONFIG_USB_LONG_TIMEOUT=y).Removing VueScanTo remove VueScan, delete the entire directory.There are no files installed elsewhere on thesystem.WarrantyTHIS SOFTWARE AND ACCOMPANYING DOCUMENTATION (INCLUDINGINSTRUCTIONS FOR USE) ARE PROVIDED "AS IS" WITHOUT WARRANTYOF ANY KIND, FURTHER, HAMRICK SOFTWARE DOES NOT WARRANT,GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE,OR THE RESULTS OF USE, OF THE SOFTWARE OR DOCUMENTATIONIN TERMS OF CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS,OR OTHERWISE. THE ENTIRE RISK AS TO THE RESULTS ANDPERFORMANCE OF THE SOFTWARE IS ASSUMED BY YOU. IF THESOFTWARE OR WRITTEN MATERIALS ARE DEFECTIVE, YOU, AND NOTHAMRICK SOFTWARE OR ITS DEALERS, DISTRIBUTORS, AGENTS, OREMPLOYEES, ASSUME THE ENTIRE COST OF ALL NECESSARYSERVICING, REPAIR OR CORRECTION.HAMRICK SOFTWARE DISCLAIMS ALL OTHER WARRANTIES, EITHEREXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THEIMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE, THAT IS MADE BY HAMRICK SOFTWARE,ON THIS HAMRICK SOFTWARE PRODUCT. NO ORAL OR WRITTENINFORMATION OR ADVICE GIVEN BY HAMRICK SOFTWARE, ITSDEALERS, DISTRIBUTORS, AGENTS OR EMPLOYEES SHALL CREATEA WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THISWARRANTY AND YOU MAY NOT RELY ON ANY SUCH INFORMATION ORADVICE. YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATETO STATE.NEITHER HAMRICK SOFTWARE NOR ANYONE ELSE WHO HAS BEENINVOLVED IN THE CREATION, PRODUCTION OR DELIVERY OF THISPRODUCT SHALL BE LIABLE FOR ANY DIRECT, INDIRECT,CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING DAMAGES FORLOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OFBUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USEOR INABILITY TO USE SUCH PRODUCT EVEN IF HAMRICK SOFTWAREHAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.Copyright 2005 Hamrick SoftwareLast updated: January 24, 2005 2ff7e9595c
Comments